Accessories
AL-2215-14 ACER-LAB 3100KV MOTOR
Product SRP: £20.15
Product Specification:
Stator Diameter: 27.8mm
Stator Thickness: 33mm
No. of Stator Arms: 9
Magnet Poles: 6
Motor Wind: 12 Turn Delta
Motor Wire: 12-Strand 0.21mm
Motor KV: 3100 RPM / Volt
No-Load Current (Io): 2.1 Amps
Motor Resistance (Rm): 0.037 Ohms
Max Continuous Current: 30 Amps
Max Continuous Power: 375 Watts
Weight: 62.5 Grams
Shaft Diameter: 3.17 mm
Overall Shaft Length: 49.5 mm
Max Lipo Cell: 3s
Stator Diameter: 27.8mm
Stator Thickness: 33mm
No. of Stator Arms: 9
Magnet Poles: 6
Motor Wind: 12 Turn Delta
Motor Wire: 12-Strand 0.21mm
Motor KV: 3100 RPM / Volt
No-Load Current (Io): 2.1 Amps
Motor Resistance (Rm): 0.037 Ohms
Max Continuous Current: 30 Amps
Max Continuous Power: 375 Watts
Weight: 62.5 Grams
Shaft Diameter: 3.17 mm
Overall Shaft Length: 49.5 mm
Max Lipo Cell: 3s
AL-40A ESC ACER-LAB ESC 40A
Product SRP: £32.99
Product Description:
The ACER-LAB 40A ESC features the following functions:
The ACER-LAB 40A ESC features the following functions:
- Balance Discharge Monitoring and Protection (BDMP) Design for lithium battery pack. This innovative new system provides
real time monitoring of the discharge voltage of each cell in your lithium (Li-ion/Li-poly) battery packs. Since each cell is monitored
and protected by the ESC, you can expect an even longer life from your battery packs.
- Compatible with both Lithium and Nickel battery types. (Lithium-Ion / Lithium-Polymer or Nickel Metal Hydride / Nickel Cadmium)
- Extremely low output resistance and super current endurance.
- Multiple protection features: Low-voltage cut-off protection / over-heat protection / throttle signal loss protection.
- 3 start modes: Normal / Soft / Super-Soft, compatible with both fixed-wing aircraft and helicopters.
- Throttle range can be configured to be compatible with all currently available transmitters on the market.
- Smooth, linear and precise throttle response.
- Separate voltage regulator IC for the microprocessor which provides a good anti-jamming capability.
- Supported maximum motor speed: 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles).
- Our pocket-sized Program Card can be purchased separately for easy programming.
- With the optional program card you can choose 15 different tunes.
Product Specification:
Output: Continuous 40A, Burst 55A for up to 10 Secs.
Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.
BEC: 3A / 5V (Switch mode).
Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
Size: 55mm (L) * 28mm (W) * 12mm (H).
Weight: 35g.
Output: Continuous 40A, Burst 55A for up to 10 Secs.
Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.
BEC: 3A / 5V (Switch mode).
Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
Size: 55mm (L) * 28mm (W) * 12mm (H).
Weight: 35g.
AL-40APC ACER-LAB 40A ESC with Programming Card
Product SRP: £39.99
Product Description:
The ACER-LAB 40A ESC features the following functions:
The Acer-Lab ESC Programming Card. This allows you to easily programme your ESC via a simple, friendly user interface. No need for the complex method of programmig through the throttle stick on your transmitter anymore!
The ACER-LAB 40A ESC features the following functions:
- Balance Discharge Monitoring and Protection (BDMP) Design for lithium battery pack. This innovative new system provides
real time monitoring of the discharge voltage of each cell in your lithium (Li-ion/Li-poly) battery packs. Since each cell is monitored
and protected by the ESC, you can expect an even longer life from your battery packs.
- Compatible with both Lithium and Nickel battery types. (Lithium-Ion / Lithium-Polymer or Nickel Metal Hydride / Nickel Cadmium)
- Extremely low output resistance and super current endurance.
- Multiple protection features: Low-voltage cut-off protection / over-heat protection / throttle signal loss protection.
- 3 start modes: Normal / Soft / Super-Soft, compatible with both fixed-wing aircraft and helicopters.
- Throttle range can be configured to be compatible with all currently available transmitters on the market.
- Smooth, linear and precise throttle response.
- Separate voltage regulator IC for the microprocessor which provides a good anti-jamming capability.
- Supported maximum motor speed: 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles).
- Our pocket-sized Program Card can be purchased separately for easy programming.
- With the optional program card you can choose 15 different tunes.
The Acer-Lab ESC Programming Card. This allows you to easily programme your ESC via a simple, friendly user interface. No need for the complex method of programmig through the throttle stick on your transmitter anymore!
Product Specification:
Output: Continuous 40A, Burst 55A for up to 10 Secs.
Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.
BEC: 3A / 5V (Switch mode).
Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
Size: 55mm (L) * 28mm (W) * 12mm (H).
Weight: 35g.
Programming Card:
Size: 92mm x 52mmx 6mm
Weight: 26g
Output: Continuous 40A, Burst 55A for up to 10 Secs.
Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.
BEC: 3A / 5V (Switch mode).
Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
Size: 55mm (L) * 28mm (W) * 12mm (H).
Weight: 35g.
Programming Card:
Size: 92mm x 52mmx 6mm
Weight: 26g
AL-A8SG Acer-Lab A8-SG Servo
Product SRP: £5.99
Product Description:
The ACER-LAB A8-SG Servo is low cost, light weight, fast and has good torque. Everything you need in a servo! A good fit with many 400/450 sized helicopters.
Product Specification:
Operating Speed:
0.11sec/60deg @ 4.7V
0.08/60deg @ 6.0V
Output Torque:
1kg/cm @ 4.8V
1.3kg/cm @ 6.0V
Dimensions: 22.8*11.6*24mm
Weight: 8g
Operating Speed:
0.11sec/60deg @ 4.7V
0.08/60deg @ 6.0V
Output Torque:
1kg/cm @ 4.8V
1.3kg/cm @ 6.0V
Dimensions: 22.8*11.6*24mm
Weight: 8g
AL-BDMP JST ACER-LAB Balance Discharge Monitoring and Protection - JST ALIGN
Product SRP: £1.89
Product Description:
Balance Discharge Monitoring and Protection (BDMP) Design is for lithium battery packs. This innovative system makes real time monitoring of the discharge voltage of each cell in your lithium (Li-ion/Li-poly) battery packs easy as each cell is monitored and protected by the ESC and you preserve the life of your lipos. This will protect your lipos and ultimately save you money.
Balance Discharge Monitoring and Protection (BDMP) Design is for lithium battery packs. This innovative system makes real time monitoring of the discharge voltage of each cell in your lithium (Li-ion/Li-poly) battery packs easy as each cell is monitored and protected by the ESC and you preserve the life of your lipos. This will protect your lipos and ultimately save you money.
Product Specification:
Suitable connector for JST balance connector as supplied with Align Lipos and similar.
Suitable connector for JST balance connector as supplied with Align Lipos and similar.
AL-BDMP TP ACER-LAB Balance Discharge Monitoring and Protection - Thunder Power
Product SRP: £1.89
Product Description:
Balance Discharge Monitoring and Protection (BDMP) Design is for lithium battery packs. This innovative system makes real time monitoring of the discharge voltage of each cell in your lithium (Li-ion/Li-poly) battery packs easy as each cell is monitored and protected by the ESC and you preserve the life of your lipos. This will protect your lipos and ultimately save you money.
Balance Discharge Monitoring and Protection (BDMP) Design is for lithium battery packs. This innovative system makes real time monitoring of the discharge voltage of each cell in your lithium (Li-ion/Li-poly) battery packs easy as each cell is monitored and protected by the ESC and you preserve the life of your lipos. This will protect your lipos and ultimately save you money.
Product Specification:
Suitable balance connector for Thunder Power, Polyquest and E-Tec Lipos and similar.
Suitable balance connector for Thunder Power, Polyquest and E-Tec Lipos and similar.
AL-D12-MG Acer-Lab D12-MG Digital Servo
Product SRP: £13.99
Product Description:
Full metal jacket - all gears are metal! Motors are really reliable same used as in a well known brand. These fit the Interceptor 400 frame perfectly (these are digital can't use with Alien Command) also fit the Trex 450 frame perfectly and beat the 65MG in terms of bang for buck!
Product Specification:
Operating Voltage Range: 4.5V-6.0V
Operating Temp Range: -20c - 60c
Operating Speed: .07sec @ 6.0V, .09sec @ 4.8V
Torque: 1.8kg.cm @6V, 1.6kg.cm @ 4.8V
Running Current Range: 50-180mA
Idle Current: 5mA
Dead Bandwidth: <3usec
Weight: 12g
Gear Material: Metal
Operating Voltage Range: 4.5V-6.0V
Operating Temp Range: -20c - 60c
Operating Speed: .07sec @ 6.0V, .09sec @ 4.8V
Torque: 1.8kg.cm @6V, 1.6kg.cm @ 4.8V
Running Current Range: 50-180mA
Idle Current: 5mA
Dead Bandwidth: <3usec
Weight: 12g
Gear Material: Metal
AL-EMC ACER-LAB ESC and Motor Combo
Product SRP: £59.99
Product Description:
Includes Acer-Lab 40A ESC, Programming card and 3100KV Motor.
Includes Acer-Lab 40A ESC, Programming card and 3100KV Motor.
Product Specification:
40A ESC
3100KV Motor
40A ESC
3100KV Motor
AL-G1000 ACER-LAB G1000 Gyro
Product SRP: £29.99
Product Description:
AVCS GYRO
The ACER-LAB Gyro is specifically designed for application on Remote Controlled Helicopters. It features both a rate and AVCS mode.
The ACER-LAB’s AVCS system delivers outstanding stability.
The Head Lock system: as the rudder is affected by cross winds the altitutde changes are automatically counteracted and rudder operation is stabalized - ensuring easier 3D flight.
It features these functions:
Minimizes crosswind affects.
Uses angular acceleration command function.
Sensor vibration proofing.
Simple sensitivity adjustment.
Product Specification:
Specifications:
Digital proportional R/C system
Dimensions(mm): 28*28*20
Operating voltage: 4.8V ~ 6V
Operating temperature: -10°c ~ +45°c
Operating current: 80mA
Specifications:
Digital proportional R/C system
Dimensions(mm): 28*28*20
Operating voltage: 4.8V ~ 6V
Operating temperature: -10°c ~ +45°c
Operating current: 80mA
AL-PC ACER-LAB ESC Programming Card
Product SRP: £6.90
Product Description:
Acer-Lab ESC Programming Card. This allows you to easily programme your ESC via a simple, friendly user interface. No need for the complex method of programmig through the throttle stick on your transmitter anymore!
Acer-Lab ESC Programming Card. This allows you to easily programme your ESC via a simple, friendly user interface. No need for the complex method of programmig through the throttle stick on your transmitter anymore!
Product Specification:
Size: 92mm x 52mmx 6mm
Weight: 26g
Size: 92mm x 52mmx 6mm
Weight: 26g
AL-SC Acer Lab Servo Case
Product SRP: £1.99
Product Description:
This a spare servo case and screws for AcerLab Servos.
This a spare servo case and screws for AcerLab Servos.
AL-SH Acer Lab Servo Horns
Product SRP: £1.75
Product Description:
Spare bag of servo horns and screw for AcerLab servos.
Spare bag of servo horns and screw for AcerLab servos.
HVTB Helivol Tool Box
Product SRP: £34.99
Product Description:
Selection of tools in attractive and practical tool box. Branded under the Helivol logo.
Product Specification:
Includes:
Pitch Gauge
Wire Cutters
Pliers
Ball Link Pliers
4.0mm Socket Driver
5.5mm Socket Driver
1.5mm Hex Driver x 2
2.0mm Hex Driver
2.5mm Hex Driver
Phillips Driver x 2
Flat Head Driver
INT400 FS Interceptor 400 Fire Starter Canopy
Product SRP: £19.99
Product Description:
Another fantastic canopy designed and painted exclusively for the Interceptor 400 by the experts at CanoMod. This one features an Iron Clad detail with creeping flame finish.
Another fantastic canopy designed and painted exclusively for the Interceptor 400 by the experts at CanoMod. This one features an Iron Clad detail with creeping flame finish.
INT400 SIL Interceptor 400 Silver Bolt Canopy
Product SRP: £19.99
Product Description:
The Silver Bolt canopy designed by CanoMod and hand painted by their expert craftsmen. This canopy puts the finishing touches to any Interceptor 400!
The Silver Bolt canopy designed by CanoMod and hand painted by their expert craftsmen. This canopy puts the finishing touches to any Interceptor 400!
INT400 TRON Interceptor 400 Tron Canopy
Product SRP: £19.99
Product Description:
This is the Interceptor 400's Firefly canopy. It looks amazing and transforms the Interceptor into one of the hottest looking RC helis around. Hand painted by the experts at CanoMod.
This is the Interceptor 400's Firefly canopy. It looks amazing and transforms the Interceptor into one of the hottest looking RC helis around. Hand painted by the experts at CanoMod.